550992 d sensors r temposonics magnetostrictive linear-position sensors r-series model rp and rh sensors - analog output position, speed, speed with direction single or dual magnet positions product specification all specifications are subject to change. please contact mts for specifications that are critical to your needs. rugged industrial sensor linear, absolute measurement leds for sensor diagnostics non-contact sensing technology non-linearity less than 0.01% repeatability within 0.001% direct analog output, displacement + speed dual magnet position measurement 100% field adjustable null and span setpoints the benefits of magnetostrictive sensing r-series linear-position sensors ?r-series model rh and rp sensors are extremely robust and are ideal for continuous operation under harsh industrial conditions. ? two standard sensor housings are available. the rod housing is capable of withstanding high pressures such as those found in hydraulic cylinders. the profile extrusion housing provides convenient mounting options and sliding magnets. ? the sensor head contains the active signal conditioning and a complete integrated electronics interface. double shielding is used to ensure emi protection for unsurpassed reliability and operating safety. temposonics linear sensors use the time-based magnetostrictive position sensing principle devel- oped by mts. within the sensing element, a sonic strain pulse is induced in a specially designed magnetostrictive waveguide by the momentary interaction of two magnetic fields. one field comes from a movable permanent magnet that passes along the outside of the sensor. the other field comes from an ?nterroga- tion?current pulse applied along the waveguide. the resulting strain pulse travels at ultrasonic speed along the waveguide and is detected at the head of the sensing element. the position of the magnet is determined with high precision and speed by accurately measuring the elapsed time between the application of the interrogation pulse and the arrival of the resulting strain pulse with a high speed counter. using the elapsed time to deter- mine position of the permanent magnet provides an absolute position reading that never needs recalibration or re-homing after a power loss. non-contact sensing eliminates wear, and guarantees the best durability and output repeatability.
2 r-series analog sensor options, parameters and specifications measured variables: displacement, speed (magnitude), or velocity (with direction) for single or dual magnets resolution: position measurement: 16 bit; 0.0015% (minimum 1 m) speed measurement: 0.1 mm/s non-linearity: < 0.01% full stroke (minimum 50 ?) repeatability: < 0.001% full stroke (minimum 2.5 ?) hysteresis: < 4 ? outputs: voltage: 0 to 10, 10 to 0, -10 to +10, +10 to -10 vdc (minimum controller load >5k ohms) current: 4(0) to 20 ma, 20 to 4(0) ma, (min./max. load 0/500 ohms) position measurement: range: profile style 50 to 5080 mm (2 to 200 in.) rod style 50 to 7620 mm (2 to 300 in.) update time: 0.5 ms up to 1200 mm, 1.0 ms up to 2400 mm, 2.0 ms up to 4800 mm, 5.0 ms up to 7620 mm stroke length. speed measurement: range: 0.025 - 10 m/s (1.0 - 400.0 in./s) deviation: <0.5% resolution: 0.1 mm/s (0.004 in./s) update time: see position measurement operating voltage: +24 vdc nominal (-15 or +20%) polarity protection: up to -30 vdc overvoltage protection: up to 36 vdc current drain: 100 ma typical dielectric withstand voltage: 500 v (dc ground to machine ground) operating conditions: temperature: - 40 to +75 ? relative humidity: 90% no condensation temperature coefficient: < 30 ppm / ? setpoint adjustment, (null/span): 100% of electrical stroke length. min. 25 mm distance between setpoints. for dual magnet outputs: min 76 mm distance between magnets. emc test: emissions iec/en 50081-1, immunity iec/en 50082-2, iec/en 61000-4-2/3/4/6, level 3/4 criterium a, ce qualified shock rating: 100 g (single hit)/iec standard 68-2-27 (survivability) vibration rating: 15 g/10-2000 hz/iec standard 68-2-6 connection type: 6-pin male d60 connector or integral cable profile style (rp model) electronic head: aluminum housing diagnostic display (led s beside connector/cable exit) sealing: ip 65 sensor extrusion: aluminum (temposonics profile style) mounting: adjustable mounting feet or t-slot nut (m5 threads) in base channel magnet type: captive-sliding magnet or floating (open ring) magnet rod style (rh model) electronic head: aluminum housing diagnostic display (led s beside connector/cable exit) sealing: ip 67 or ip 68 for integral cable model sensor rod: 304l stainless steel operating pressure: 350 bar static, 690 bar peak (5000 psi static, 10,000 psi peak) mounting: any orientation, threaded flange m18 x 1.5 or 3/4-16 unf-3a typical mounting torque: 45 n-m (33 ft. - lbs.) magnet type: ring, floating (open ring) magnet, or magnet float parameter specification enhanced monitoring and diagnostics sensor status and diagnostic display integrated leds (green/red) provide basic visual feedback for normal sensor operation and troubleshooting. led s green red description on off normal function (operation mode) on flashing magnet out of setup range on on magnet not detected or wrong quantity of magnets flashing on programming mode outputs single magnet sensor dual magnet sensor m1 m1a active stroke length (measuring range) position / speed m1 m2 m1a m2a 0 v 10 v 0 v 10 v 0% 100% position 1 / position 2 76 mm min. (3.0 in.) the r-series analog sensor provides single or dual magnet sensor options along with one or two channel outputs. the r-series analog sensor can be ordered for a single-position magnet providing one displacement output, and/or one velocity output over the active stroke length. the sensor can also be ordered for dual-position magnets providing two displacement outputs, or two velocity outputs, or one of each. when using dual magnets, the minimum allowed distance between the magnets is 3.0 in. (76 mm) to maintain proper sensor output. mts sensors product specification 550992 d
3 sensor field programming temposonics r-series analog sensors are preconfigured at the factory by model number designation. for many applications, no adjustments are required for normal sensor installation and opera- tion. if, however, sensor parameter changes are needed while in the field, the r-series analog sensor is easily programmed externally. there is no need to open the sensor s electronic housing. r-series analog handheld programmer (for single magnet sensors) r-series analog pc programming kit, part no. 253309 for single or dual magnet sensors windows sensor programming advanced communication and programmability handheld programmer, part no. 253124 sensor 24 v the r-series analog handheld programmer (part number 253124) can be used to program the magnet positions for the start of output, (0% = 0 vdc, -10 vdc, 4 ma, or 0 ma), and the end of output, (100% = 10 vdc or 20 ma), for the single magnet version of the r-series analog sensor. this programming kit includes a wall adapter style power supply, serial converter box, two connection cables (wired for the lin proto- col), and the software cd-rom. the serial converter box and one of the cables are required to communicate between a windows pc and the sensor. when running the r-series analog pc setup software many customized settings are possible for: ? setpoint 1 (null) and setpoint 2 (span) for single or dual magnets. (see the description for setpoints under the section, ?-series analog handheld programmer?) ? output range settings for speed, or for speed with direction. ? assign position or velocity output functions for the single or dual magnets, and for the one or two output channels. (output function assignments are limited to the manufacturing build type of the sensor, see below.) ? error output values when the magnet moves beyond the programmed setpoints. field programming to adjust the output values is available for any setting needed, within the selected output range. each sensor s out- put range is selected from the available options when ordering a particular sensor model number, (see pages 7 and 8). there are 6 different manufacturing build types used to provide for the various output ranges. these are: single channel output for either position or speed 1) voltage output between 0 and +10 volts 2) voltage output between -10 and +10 volts 3) current output between 0 (or 4) and 20 ma t wo channel outputs for position and/or speed 4) voltage outputs between 0 and +10 volts 5) voltage outputs between -10 and +10 volts 6) current outputs between 0 (or 4) and 20 ma standard factory settings place the setpoint 1 (null) and setpoint 2 (span) at the limits of the sensor s active stroke range. for example, a sensor ordered with 4 - 20 ma output will be factory set for 4 ma output at the bottom limit of the stroke range at the ?ull?position. likewise, the 20 ma output will be factory set at the top limit of the stroke range at the start of the ?ead zone? setpoint 1 and setpoint 2 can be re-positioned for the actual measuring range needed anywhere within the active stroke length. (note: the minimum distance allowed between setpoint 1 and set- point 2 is 25 mm.) these adjustments are easily performed, even when the sensor is not directly accessible, by connecting the analog handheld programmer to the sensor s integral cable or extension cable. output value forward reverse 1 magnet sensor setpoint 1 (null) setpoint 2 (span) position electronics housing dead zone mts sensors product specification 550992 d note: field programming allows for numerous custom sensor configurations, however, please note that field programming can not be used to change the r-series analog sensor from one manufacturing build type to another.
4 model rp profile-style sensor beginning of stroke - null position captive-sliding magnet 14.5 mm (0.57 in.) mou ntin g foo t 12 mm (.47 in.) 75 mm (2.95 in.) 12 mm (0.47 in.) 49 mm 1.92 in.) 45 mm (1.77 in.) 2 mm (.07 in.) 9.5 mm (0.37 in.) ? 5.5 mm (0.21 in.) for m5 or #10 screw 68 mm (2.67 in.) 50 mm (1.96 in.) 3.6 mm (1.40 in.) 66 mm (2.59 in.) stroke length dead zone 28 mm (1.10 in.) sensor head selection of position magnets (included with sensor) mounting support (non-ferrous material) open ring magnet beginning of stroke - null position sensor head 28 mm (1.10 in.) 22 mm (0.86 in.) 28 mm (1.10 in.) 45 mm (1.77 in.) 52 mm (2.05 in.) 36 mm (1.41 in.) 20.7 mm (0.81 in.) max gap 3mm 1mm (0.12 in. 0.04 in. ) 29 mm (1.14 in.) rotation: vertical: 18 horizontal: 360 24 mm (0.95 in.) 43 mm (1.69 in.) 14 mm (0.55 in.) 40 mm (1.58 in.) 20 mm (0.79 in.) ball-jointed arm, m5 thread 18 rotation 24 mm (0.95 in.) 57 mm (2.24 in.) 14 mm (0.55 in.) 40 mm (1.58 in.) 9 mm (0.35 in.) ball-jointed arm, m5 thread 60 24.6 mm (0.97 in.) 2 holes each 4.3 mm dia. (0.17 in.) on 23.9 mm dia. (0.94 in.) 14 mm (0.57 in.) 20.7 mm (0.81 in.) id: 13.5 mm (0.53 in.) od: 32.8 mm (1.29 in.) thickness: 7.9 mm (0.312 in.) captive-sliding magnet, style v part no. 252184 captive-sliding magnet, style s part no. 252182 floating (open ring) magnet, style m part no. 251416-2 captive-sliding magnet floating magnet (open ring) d60 connector option r05 integral cable option the temposonics model rp sensor offers modular construction, flexible mounting configurations and easy installation. mts sensors product specification 550992 d a choice of two magnet mounting configurations are available with the profile-style sensor; the captive- sliding magnet or the floating (open ring) magnet. captive-sliding magnets utilize slide bearings of special material that reduce friction, and if required, help mitigate dirt build up. the slide bearings are designed to operate dry, requiring no external lubrication or maintenance. the floating magnet (open ring) mounts on the moving machine part and travels just above the sensor s profile extrusion. the open ring magnet (style m) requires a minimum distance away from ferrous metals to allow proper sensor output. it must be mounted using non-ferrous screws and a non-ferrous support bracket, or utilize a non-ferrous spacer of at least 5 mm (0.2 in.) thickness.
5 model rh rod-style sensor led window 44 mm (1.7 in.) 68 mm (2.7 in.) 50.8 mm (2.00 in.) integral connector beginning of stroke (null position) end of stroke electronics housing null zone stroke length flat-faced hex flange a sensor rod o10mm (0.39 in.) 25 mm (0.98 in.) dead zone stroke dependent refer to chart below m4 x 59 mm button-head hex screws (2x) o-ring selection of position magnets (must order separately) b 68 mm (2.7 in.) a raised-face hex flange grounding lug mating connector (6 pin din style) 76 mm (3.0 in.) 25 mm (0.98 in.) 2.5 mm (0.10 in.) 25.4 mm (1.00 in.) 50.8 mm (2.00 in.) beginning of stroke (null position) null zone o-ring c the temposonics r-series rod-style sensor (model rh) offers modular construction, flexible mounting configurations, and easy in stallation. it is designed for internal mounting in applications where high pressure conditions exist, (5000 psi continuous, 10,000 psi spike), such as hy draulic cylinders. the model rp sensor may also be mounted externally in many applications. 4 holes each 4.3 mm dia. (0.17 in.) 90 apart on 23.9 mm dia. (0.94 in.) id: 13.5 mm (0.53 in.) od: 32.8 mm (1.29 in.) thickness: 7.9 mm (0.312 in.) o id: 13.5 mm (0.53 in.) o.d.: 25.4 mm (1.0 in.) thickness: 7.9 mm ( 0.312 in. ) standard-ring magnet part no. 201542-2 floating (open ring) magnet, style m part no. 251416-2 magnet spacer (non-ferrous spacer for use with standard ring magnet) part no. 400633 ring magnet part no. 400533 id: 14.3 mm (0.56 in.) o.d.: 31.8 mm (1.25 in.) thickness: 3.2 mm (0.125 in.) each 3.9 mm o.d. (0.15 in.) 90 o apart on 23.9 mm o.d. (0.94 in.) 4 holes magnets must be ordered separately with model rh position sensors. the standard ring magnet (part number 201542-2) is suitable for most applications. 60 24.6 mm (0.97 in.) 2 holes each 4.3 mm dia. (0.17 in.) on 23.9 mm dia. (0.94 in.) 14 mm (0.57 in.) 20.7 mm (0.81 in.) id: 13.5 mm (0.53 in.) od: 32.8 mm (1.29 in.) thickness: 7.9 mm (0.312 in.) stroke-dependent dead zones stroke length dead zone 50 - 5000 mm (2 - 197 in.) 63.5 mm (2.5 in.) 5005 - 7620 mm (197.1 - 300 in.) 66 mm (2.6 in.) housing style flange type description a flange threads b dimensions c dimensions t us customary threads with raised-face hex 3/4?16 unf-3a 44.5 mm (1.75 in.) 51 mm (2.0 in.) s us customary threads with flat-faced hex 3/4?16 unf-3a 44.5 mm (1.75 in.) 51 mm (2.0 in.) m metric threads with flat-faced hex m18 x 1.5 46 mm (1.81 in.) 53 mm (2.1 in.) specific gravity: 0.70 max. pressure: 870 psi max 14 mm (0.55 in.) min. id 51 mm (2.0 in.) spherical od 3.4 mm (0.134 in.) c 53 mm (2.09 in.) l specific gravity: 0.70 max. pressure: 870 psi max. (float for use with rod-style sensors in hydraulic fluid or fresh water applications only) c l magnet float (level sensing applications) part no. 251447 mts sensors product specification 550992 d
6 mounting, wiring and magnets the position magnet requires minimum distances away from ferrous metals to allow proper sensor output. the minimum distance from the front of the magnet to the cylinder end cap is 15 mm (0.6 in.). the minimum dis- tance from the back of the magnet to the piston head is provided by the non-ferrous spacer, i.e. 3.2 mm (0.125 in.). sensor hydraulic housing flange with tube becomes a permanent part of the cylinder ring magnet sensor cartridge electronic head + sensor element, easy to replace in field with screws, ( m4 thread, 2.5 mm hex socket head ) when used for direct stroke measurement in fluid cylinders, the sensor's stainless steel rod installs into a bore in the piston head/rod assembly as illustrated. this method guarantees a long-life and trouble-free operation. the sensor cartridge can be removed from the flange and rod housing while still installed in the cylinder. this procedure allows quick and easy sensor cartridge replacement, without the loss of hydraulic pressure. cable connectors (field installed d6 female) 5 mm (0.20 in.) t-slot nut, m5 thread (optional, sold separately) m5 threaded stud and nut max gap 3mm 1mm (0.12 in. 0.04in.) non-ferrous mounting support and screws floating magnet (open ring) style "m" part number 251416-2 non-ferrous spacer > 15 mm (0.60 in.) min. 3.2 mm (0.125 in.) ring magnet 18 mm (0.7 in.) 54 mm (2.1 in.) 54 mm (2.1 in.) 37 mm (1.5 in) profile-style sensor mounting rod-style sensor mounting cylinder installation d6 straight-exit connector part no. 560700 d6 90 o connector part no. 560778 5 4 3 6 2 1 pin no. wire color function analog outputs 1 gray output 1/position #1: 0 to 10, 10 to 0, -10 to +10, +10 to -10v 4 to 20, 20 to 4, 0 to 20, 20 to 0 ma 2 pink return for pin 1 3 yellow output 2/position #2 or speed: 0 to 10, 10 to 0, -10 to +10, +10 to -10v 4 to 20, 20 to 4, 0 to 20, 20 to 0 ma 4 green return for pin 3 5 red or brown +24 vdc (-15 / +20%) 6 white dc ground (for supply) male integral d6 connector pin-out as viewed from the end of the sensor sensor integral connector (d60 male) flexible installation in any position temposonics model rp profile-style sensors offer two basic mounting methods; side groves for use with mounting feet or a bottom grove that accepts special t-slot nuts. both the mounting feet and t-slot nuts can be positioned along the sensor extrusion to best s ecure the sensor for each particular application. mounting foot and screws note: temposonics model rp sensors include two mounting feet (part no. 400802) for sensors up to 1250 mm (50 in.) one additional mounting foot is included for every additional 500 mm (20 in.) mates with sensors integral connector note: when using the single channel output (pins 1 and 2), the unused pins for output 2 (pins 3 and 4) should be left floating (unconnected), unless sensor programming is being used. mts sensors product specification 550992 d
7 how to order mts sensors product specification 550992 d sensor model rp = profile style rh = hydraulic rod style rf = flexible style housing style model rp sensor only (magnet included): s = captive-sliding magnet with joint at top (part no. 252182) v = captive-sliding magnet with joint at front (part no. 252184) m = floating magnet, open ring (part no. 251416-2) model rh sensor only (magnet must be ordered separately): t = us customary threads, raised-faced hex, and pressure tube s = us customary threads, flat-faced hex, and pressure tube m = metric threads, flat-faced hex, and pressure tube b = sensor cartridge only (no pressure tube, stroke lengths < 72 in.) model rf sensor only, (reference the flex housing style section in the industrial catalog, part number 551075), magnet must be ordered separately: s = us customary threads, flat-faced hex m = metric threads, flat-faced hex stroke length m = millimeters (encode in 5 mm increments) . u = inches and tenths (encode in 0.1 in. increments) connection type integral connector d60 = 6-pin din, male, standard integral cables r = integral cable, pvc jacket, pigtail termination cable length options: = encode in feet if using us customary stroke length, encode in meters if using metric stroke length range = 1 (01) to 99 (99) ft. or 1 (01) to 30 (30) meters. input voltage 1 = +24 vdc (+20% - 15%) output (13 - 19) 3 to 7 digit code depending on output selected ( please note that selections below are continued on page 8 ) 1 output channel with 1 magnet (3 digit code) output #1 = magnet position v01 = 0 to +10 vdc a01 = 4 to 20 ma v11 = +10 to 0 vdc a11 = 20 to 4 ma v21 = -10 to +10 vdc a21 = 0 to 20 ma v31 = +10 to -10 vdc a31 = 20 to 0 ma 2 output channels with 2 magnets * (3 digit code) output #1 = magnet #1 position output #2 = magnet #2 position v02 = 0 to +10 vdc 0 to +10 vdc v12 = +10 to 0 vdc +10 to 0 vdc v22 = -10 to +10 vdc -10 to +10 vdc v32 = +10 to -10 vdc +10 to -10 vdc a02 = 4 to 20 ma 4 to 20 ma a12 = 20 to 4 ma 20 to 4 ma a22 = 0 to 20 ma 0 to 20 ma a32 = 20 to 0 ma 20 to 0 ma * standard factory settings for the setpoint values are the same for both magnets, i.e. both magnets have setpoint 1 at the null position, and setpoint 2 at the start of the dead zone. if needed, the setpoint values for each magnet can be reprogrammed in the field to best fit the applica tion, (see page 4 for more infor- mation). for proper sensor output, the minimum allowed distance between the magnets is 3.0 in. (76 mm). stroke length notes: ?profile (rp) stroke range = 50 - 5080 mm. (2 - 200 in. ) ?rod (rh) stroke range = 50 - 7620 mm. (2 - 300 in.) r cable length note: mts recommends the maximum integral cable length to be 10 meters or 33 feet. cables greater than 10 meters in length are available, however, proper care must be taken during handling and installation. 3 to 7 digit code depending on output selected 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1 9 1
how to order (continued) 8 mts sensors product specification 550992 d output (13 - 19) 3 to 7 digit code depending on output selected ( please note that selections below are continued from the previous page ) 2 output channels with 1 magnet (7 digit code, fill in the blanks with the desired maximum speed value as described below) output #1 = magnet position output #2 = speed magnitude v01 = 0 to +10 vdc +10 (towards head) 0 (at rest) +10 (towards tip) vdc v11 = +10 to 0 vdc +10 (towards head) 0 (at rest) +10 (towards tip) vdc a01 = 4 to 20 ma 20 (towards head) 4 (at rest) 20 (towards tip) ma a11 = 20 to 4 ma 20 (towards head) 4 (at rest) 20 (towards tip) ma output #1 = magnet position output #2 = v elocity (speed with direction) v41 = 0 to +10 vdc 0 (towards head) 5 (at rest) +10 (towards tip) vdc v51 = +10 to 0 vdc +10 (towards head) 5 (at rest) 0 (towards tip) vdc v61 = 0 to +10 vdc -10 (towards head) 0 (at rest) +10 (towards tip) vdc v71 = +10 to 0 vdc +10 (towards head) 0 (at rest) -10 (towards tip) vdc v81 = -10 to +10 vdc -10 (towards head) 0 (at rest) +10 (towards tip) vdc v91 = +10 to -10 vdc +10 (towards head) 0 (at rest) -10 (towards tip) vdc a41 = 4 to 20 ma 4 (towards head) 12 (at rest) 20 (towards tip) ma a51 = 20 to 4 ma 20 (towards head) 12 (at rest) 4 (towards tip) ma output #1 = magnet position (for ward-acting) output #2 = magnet position (reverse-acting) v03 = 0 to +10 vdc (3 digit code) +10 to 0 vdc for sensor models with speed output, fill in the blanks for the desired maximum speed value as shown below. for us customar y stroke lengths, encode speed for in./s as follows: = speed output max. (fill in remaining 4 blanks with desired max. speed value) available range for us customary stroke lengths is 1.0 to 400.0 in./s, (0010 ?4000) example: for max. speed of 12.0 in./s, and output produced = [-10(towards head) ?0(at rest) ?+10(towards tip) volts] encode: v 6 1 0 1 2 0 or v 8 1 0 1 2 0 for metric stroke lengths, encode speed for m/s (range 1) or mm/s (range 2) as follows: speed range #1 , ( 0 ) 0 = speed output max. (fill in the remaining 3 blanks with desired max. speed value) speed range 1 for metric stroke lengths is 0.1 to 10.0 m/s, (0001 ?0100) example: for max. speed of 5.5 m/s, and output produced = [+10(towards head) ?0(at rest) ?+10(towards tip) volts], encode: v 0 1 0 0 5 5 speed range #2 , ( 1 ) 1 = speed output max. (fill in remaining 3 blanks with desired max. speed value) speed range 2 for metric stroke lengths is 25 to 90 mm/s, (1025 ?1090) example: for max. speed of 50 mm/s, and output produced = [4(towards head) ?12(at rest) ?20(towards tip) ma], encode: a 4 1 1 0 5 0 field programming notes: 1) sensor models ordered with one output channel can not be reprogrammed in the field to provide a second output channel. 2) sensor models ordered with positive only output voltages can not be reprogrammed in the field to include negative output vo ltages. 3) sensor models ordered with both positive and negative output voltages can be reprogrammed in the field for positive only vo ltages, or negative only voltages, however, output resolution is then reduced. . .
description function/notes par t no. mounting feet, standard (spares) model rp sensors come with mounting feet (see page 6). 400802 base channel t-slot nut nut for mounting model rp sensors. requires m5 screw (see page 6). 401602 hex jam nut 3/4 - 16 unf nylon insert locknut for use with model rh sensors with style ??or ??housing 500015 o-ring (spare) for use with model rh sensors with style ??or ??housing 560315 o-ring (spare) for use with model rh sensors with style ??housing 401133 joint-rod sleeve (1 in.) for use with model rp sensors with ??or ??style magnets 401603 ball-jointed arm, straight for use with model rp sensors with ??or ??style magnets 401913 description function/notes par t no. small open ring (model rp spare) magnet style m, ?loating?magnet used with model rh and rp sensors. 251416-2 small ring magnet standard magnet for model rh sensors. 201542-2 magnet float for use with rh sensors used to measure liquid level 251447 captive-sliding magnet (spare) style s captive-sliding magnet with joint at top. comes with rp sensors. 252182 captive-sliding magnet (spare) style v captive-sliding magnet with joint at front. comes with rp sensors. 252184 magnet spacer for use with standard ring magnet, part no. 201542-2. 400633 collar provides end of stroke ?tops?for magnet float, part number 251447. 560777 magnet mounting screws used to mount the standard ring magnet, part no. 201542-2. (4 screws required) 560357 description function/notes par t no. 6-pin din connector, 90 female, 90?xit, mates to d60 connection type (see page 6) 560778 6-pin din connector, straight female, straight exit, mates to d60 connection type (see page 6) 560700 description function/notes par t no. r-series analog hand held for adjusting null (setpoint 1) and span (setpoint 2) on r-series analog sensors. 253124 programmer r-series analog pc includes serial converter, power supply, programming cables, and software cd. 253309 programming kit accessories magnets and float options field-installed connectors programming tools how to order (continued) 50 mm (1.97 in.) 68 mm (2.68 in) 9.1 mm (0.36 in.) 9.1 mm (0.36 in.) 0.213 in. dia. through 4 holes 304 sst 27.9 mm (1.1 in.) 1.9 mm (0.075 in.) width = 14.5 mm (0.57 in.) mounting foot standard mounting foot part no. 400802 14 mm (0.55 in.) m5 threads rotation: 18 allowable 9 mm (0.35 in.) m5 inside thread (2) (1) 22 mm (0.87 in.) 27 mm (1.06 in.) joint rod used with captive-sliding magnets (1) sleeve, part no. 401603 (2) ball-jointed arm, part no. 401913 extension rod lengths part no. 60.3 mm (2.375 in.) 401768-2 85.7 mm (3.375 in.) 401768-3 111.1 mm (4.375 in.) 401768-4 161.9 mm (6.375 in.) 401768-6 187.3 mm (7.375 in.) 401768-7 212.7 mm (8.375 in.) 401768-8 238.1 mm (9.375 in.) 401768-9 263.5 mm (10.375 in.) 401768-10 314.3 mm (12.375 in.) 401768-12 365.1 mm (14.375 in.) 401768-14 extension rod lengths part no. 390.5 mm (15.375 in.) 401768-15 466.7 mm (18.375 in.) 401768-18 517.5 mm (20.375 in.) 401768-20 542.9 mm (21.375 in.) 401768-21 619.1 mm (24.375 in.) 401768-24 771.5 mm (30.375 in.) 401768-30 923.9 mm (36.375 in.) 401768-36 1076.3 mm (42.375 in.) 401768-42 1228.7 mm (48.375 in.) 401768-48 1533.5 mm (60.375 in.) 401768-60 9.5 mm (0.375 in.) m5-0.8 thread bor e (both ends) 15.2 mm (0.60 in.) (both ends) extension rod part no. 401768-xx optional extension rods (for use with captive-sliding magnets) 9 mts sensors product specification 550992 d
part number: 09-06 550992 revision d temposonics and mts are registered trademarks of mts systems corporation. all other trademarks are the property of their respective owners. all temposonics sensors are covered by us patent number 5,545,984. additional patents are pending. printed in usa. copyright ?2006 mts systems corporation. all rights reserved. united states mts systems corporation sensors division 3001 sheldon drive cary, nc 27513 tel: (800) 633-7609 fax: (919) 677-0200 (800) 498-4442 www.mtssensors.com sensorsinfo@mts.com germany mts sensor technologie gmbh & co. kg auf dem schuffel 9 d-58513 l?denscheid tel: +49 / 23 51 / 95 87-0 fax: +49 / 23 51 / 56 491 www.mtssensor.de info@mtssensor.de japan mts sensors technology corporation ushikubo bldg. 737 aihara-cho, machida-shi tokyo 194-0211, japan tel: + 81 (42) 775 / 3838 fax:+ 81 (42) 775 / 5516 www.mtssensor.co.jp info@mtssensor.co.jp how to order (continued) extension cable with connectors for the d6, (d60), connection type sensor connection type d6 = female connector, (straight exit), and standard (part no. 530026) cable (pvc jacket) for sensors with d6 or d60 connector da = female connector, (90 exit), and standard (part no. 530026) cable (pvc jacket) for sensors with d6 or d60 connector dj = female connector, (straight exit), and (part no. 530045) cable, (black polyurethane jacket for higher resistance to moisture and oil), for sensors with d6 or d60 connector dk = female connector, (90 exit), and (part no. 530045) cable, (black polyurethane jacket for higher resistance to moisture and oil), for sensors with d6 or d60 connector cable lengths for standar d length cables up to 100 ft 005 = 5 ft. 050 = 50 ft. 015 = 15 ft. 100 = 100 ft. 025 = 25 ft. for custom length cables over 100 ft _ _ _ = cable length (maximum cable length is dependent on the output selected; consult mts applications engineering.) cable termination (2 or 3 characters depending on option selected) p0 = pigtail connection, (no connector). d6m = d6 male connector, (straight exit). only available with the d6 option above. d6f = d6 female connector, (straight exit). only available with the d6 option above. daf = d6 female connector, (90 degrees exit). only available with the da option above. d
|
